DEPTH
- The depth alarm sounds when the depth (from the transducer to the estimated bottom)
is less than the setting.
• Operation:
Press and hold
the
UP
or
DOWN
to activate the alarm and set the depth.
Press
and release
the
UP
or
DOWN
button to turn the alarm on and off.
FISH ALARM
- The fish alarm chimes and displays fish symbols to represent echoes that are likely
to be from fish. The depth of the fish is also shown if there is room on the display. The symbol size
indicates the relative signal strength of the echo, with the largest representing the strongest echo.
NOTE:
A timer function prevents the alarm from chiming too often.
UNITS
- The Fishin’ Buddy™ 2202 can display in either imperial (U.S.) or metric units for depth and
temperature.
RESET
- This feature resets most menu settings back to the factory defaults. Try using Reset when
the Fishin’ Buddy™ 2202 does not appear to be working properly and you are not sure if the
problem is in the settings. When the Reset menu is on the screen, press the
UP
or
DOWN
button
to reset the settings.
SCREEN
- This feature will allow the Sidefinder to be on or off.
SIDE RANGE
- The Sidefinder Range control allows you to set how far to the side the Fishin’
Buddy™ 2202 will display fish. If you are casting, you'll probably want to choose a close range
to get the maximum detail in the cone. The Sidefinder Range is displayed in the upper-left
corner of the display.
10
FB2202_English.qxp 3/14/2006 12:06 PM Page 11
