Botex DPX-620III, Руководство пользователя

Страница: 25 / 40

Proceed as follows to assign DMX addresses to the dimmer channels:
1.
Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the ‘Patching’
menu.
2.
Confirm with [MENU] .
ð
The display shows ‘Patching Start’ .
3. Use [UP] or [DOWN] to select between assignment mode ‘Start’ (channels are automati‐
cally addressed consecutively) and ‘Independent’ (DMX addresses are independent of
each other).
Confirm with
[MENU] .
4. In ‘Start’ mode: Use [UP] or [DOWN] to select the DMX address of channel 1 in a rage 1 …
512.
Confirm with
[MENU] .
5.
In ‘Independent’ mode: Use [UP] or [DOWN] to select between ‘All’ (all channels get the
same DMX address) and ‘Single’ (each channel can get an individual DMX address).
In ‘Independent – All’ mode: Use [UP] or [DOWN] to select the DMX address for all chan‐
nels in a rage 1 … 512. Confirm with [MENU] .
Assigning a DMX address
(patching)
Operating
DPX-620III 6-Ch.
25
dimmer pack