4.8 Other Settings
The Preference menu has following 6 sub-menu.
- Language Setting
- OSD Setting
- Parental Lock
- Tetris
- Snake
- Sokoban
And The Config menu has following 5 sub-menu.
- TV Settings
- Time Settings
- Clear Data
- System Information
- System Upgrade
<Language Setting>
You can select OSD menu language, Audio
language and subtitle language. Use the
Right
or
OK
button to view language list.
<screen 23>
<OSD Setting>
<Parental Lock>
-
Color scheme
: You can select other OSD
color pattern.
-
Transparency
: You can control OSD
transparency level.
-
Brightness
: You can control OSD
brightness level.
-
OSD Time-Out
: Select the time how long
the banner will be visible
when banner is displayed.
Changes the Personal Identification Number
(PIN) which is used to control the access to
the receiver and individual channel.
- Menu Lock/UnLock
- Change PIN
If menu is set to Unlock, the receiver doesn't
ask to input your PIN in the menu operation.
Use the
Left/Right
button to change menu
lock status. If the lock key message is
inconvenient, set the key to UnLock.
To change the current PIN, First you can
input the current PIN and then input new
PIN you want to use and then confirm this
new PIN. After changing, you must save the
PIN configuration using the Save button.
<screen 24>
<screen 25>
20
21
Setting and Operations
Setting and Operations
<Tetris>
If you want to play game, Select the
Preference item and use the tertris
button.
- Left/Right button
: Move block to a left or
right direction
- Down button
: Drop block
- OK
: Rotate block
If you want to stop the game, use the
EXIT
button.
<screen 26>
<Snake>
- Left/Right button
: Move snake icon to
left or right direction.
- Up/Down button
: Move snake icon to up
or down direction.
If Blue snake icon is passed through the
green icon length is increased, but passed
through the yellow icon length is decreased.
If passed through Gray icon current game
mode is ended.
<screen 27>
<Sokoban>
You are the sokoban and you have to push
the balls to their correct positions(SKYBLUE
square). The balls can only be pushed,
never pulled, so you have to be careful not
to push them into a corner where you can't
get them out again. You can only push one
ball at the time.
<screen 28>
You can move around by using the arrow
keys. You can restart level by using color
key(RED). You can use undo function by
using color key(GREEN) for moving cancel
(Only one step). You can go to previous or
next level (between completed level) by
using color key(BLUE, YELLOW)
<TV Settings>
- TV Mode
You can select OSD & video display mode
to one of Multi, PAL, NTSC. When PAL
mode is selected, for example All screen
is displayed as the PAL mode in spite of
the current Programs transmission mode.
- Video output
You can change the SCART output signal
into Composite (CVBS) or RGB color
composition.
<screen 29>