Bosworth MS-SCK-001, Руководство пользователя

Страница: 14 / 28

S C O
When SapCheck receives a text message from a Command Number, it will
always reply by tex ng back a con
fi rming message. This indicates that Sap ‐
Check has received and processed the text message command that you sent.
M F —A S C Q (?)
To ask SapCheck a ques on, you simply begin the text message with a ques ‐
on mark (?) or the word “get”. SapCheck can provide you with temperature
and vacuum informa on as collected from its temperature and vacuum sen ‐
sors. Addi onally, SapCheck will tell you whether or not the level of sap in
your sap collec on tank has reached the tank
fl oat switch. The “?” (get)
commands allow you to inquire about the readings from these sensors:

“ ?temp ” OR “ get temp ” returns current temperature

“ ?vac ” OR “ get vac ” returns current vacuum

“ ?tank ” OR “ get tank ” returns a message indica ng whether or
not the sap has reached the sap alert level
(Note that the sap alert level corresponds to the height at which
you have installed the
fl oat switch on your sap collec on tank.)
Addi onally, you can send the following text messages:

“ ?status ” OR “ get status ” returns a message indica ng current
temperature, vacuum, tank full status and pump opera on state.
Note: This is the most e ffi cient way to monitor condi ons at the
sugarbush as it returns all informa on in one text message, as
opposed to mul ple individual messages for each piece of infor
‐
ma on.

“ ?se ngs ” OR “ get se ngs ” returns a message indica ng the
values of all the control or alert se ngs that you have previously
de
fi ned.

“ ?version ” OR “ get version ” returns the current version number
of the SapCheck so ware installed in the Controller.
13
Doc M-PR-09-45.120119.1
The Bos
w
orth Company
SapCheck User’s Guide