Boston Whaler 25 Guardian Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 42 / 134

2-20
Section 2 Boat Operation
Operation
The trim tab switch panel is labeled and wired to make
tab operation simple. When operating the trim but-
tons, think of how you want the
bow of the boat to
move to properly trim the boat.
To lower the port bow, push the left DOWN button.
This lowers the trim plane on the starboard side of the
transom.
To lower the starboard bow, push the right DOWN
button. This lowers the trim plane on the port side of
the transom.
To evenly lower or raise the bow, you can push both
buttons at the same time. To evenly
lower the bow,
push both DOWN buttons. To evenly raise the bow,
push both UP buttons.
The Lenco switch panel includes two LED segment
bars that represent the relative position of both trim
tabs. When you
lower one or both of the trim tabs, the
LED segment bars will extend to indicate that the trim
tabs are moving down. When you
raise one or both of
the trim tabs, the LED segment bars will retract to indi-
cate that the trim tabs are moving up.
Refer to the Lenco operation manual in your owner’s
bag for detailed information about the operation and
maintenance of the trim tab system.
!
CAUTION
The trim tabs will automatically retract when the
starboard engine main ignition key is turned
OFF. Make sure that both trim tabs are fully
retracted before you put the boat on a trailer,
cradle, or boatlift. Contact with the trim tabs
can cause serious damage to the tabs and boat.