Boston Scientific EASYTRAK 2 IS-1, Руководство врача-руководителя

Страница: 43 / 63

LEAD EVALUATION—EASYTRAK 2 IS-1 LEAD
7
distal end of the lead or not stabilize the lead properly.
CAUTION: The finishing wire MUST BE REMOVED before connecting the
lead to the pulse generator.
• Guide wire, 0.014-in (0.36-mm) diameter, and torque device that is
intended for use in the coronary venous system
• Standard occlusion balloon, 6F (optional), that is used to obtain
venograms by occluding the coronary sinus
• Implant accessories
Opening Instructions
The outer package and sterile tray should be opened under clean
conditions. To ensure sterility, the sealed inner sterile tray must be opened
using accepted aseptic technique by scrubbed, masked personnel. The
sterile tray is opened by peeling back the cover.
Sterilization
Boston Scientific sterilizes the lead and accessories with ethylene oxide gas
(EO) before final packaging. When they are received, they are sterile and
ready for use. If the container is wet, damaged, punctured, or if the seal is
broken, return the lead to the nearest Boston Scientific representative.
Never attempt to resterilize the lead or accessories. Instead, return the lead
to Boston Scientific at the address on the back cover of this manual.
Storage
Recommended storage temperature range is 20°C to 25°C. Avoid
temperatures above 50°C.
Surgical Preparation
Instrumentation for heart monitoring, imaging (fluoroscopy), external
defibrillation, and pacing threshold and sensitivity measurements should be
available during implantation. The sterile field should be large enough to
accommodate the use of the guide wires. Sterile duplicates of all
implantable items should also be available for use if accidental damage or
contamination occurs. Always isolate the patient from potentially hazardous
leakage current when using electrical instrumentation.
356995-051 EN Europe.book Page 7 Monday, August 8, 2011 3:43 PM