Direct Configuration
Diffuse Configuration
In either case, the best results will be obtained if the VRX is mounted above ear level and
out at least 20 inches from the corner. However, it has been our experience that satisfacto-
ry results can be obtained with a wide variety of placement choices. Experiment between
direct and diffused patterns by simply swapping the right and left speakers.
Mounting Tips
Use the supplied template to aid in positioning the mounting bracket. At least 4 inches of
clearance is required between the top of the template and the ceiling. Please take care that
the mounting brackets are attached securely to the chosen surface. Toggle bolts are sup-
plied for use on drywall or hollow plaster walls. Alternatively, you may wish to obtain wood
screws for wood or wall studs or masonry anchors for masonry walls. Use the supplied self-
adhesive rubber feet to place the speakers upright on a shelf.
Setting Up Your Home Theater System
Volume Levels:
To obtain the best home theater effect, match the sound levels of each speak-
er. Home theater systems include a test signal that simplifies this level matching. Refer to the instruc-
tions provided with your surround sound electronics.
Bass Management:
Set the surround channels to “SMALL.” This setting diverts low bass to the
LFE channel, and will result in the greatest total system bass output. For more information on Bass
Management refer to the instructions provided with your surround sound electronics.
