Wall or Ceiling Mounting Your VRX Speakers
The VRX is designed to be mounted directly onto a wall or ceiling. First attach the eight sup-
plied self-adhesive felt pads, one on the back of each corner of both speakers. Then attach
the bracket to the wall or ceiling and slide the speaker on to the bracket.
You may run wires to the speakers on the wall surface or behind the wall. Use the recessed
area on the back of the speaker to accommodate the wire slack.
Mounting on drywall, paneling or other hollow surfaces:
Use the 6-32 x 2" machine screws
and toggle wings provided. The toggle wings require a
1
⁄
2
" (12mm) hole.
Mounting on wood and other solid surfaces:
Use a #6 or #8 wood screw.
Mounting on masonry, adobe and similar surfaces:
Consult a knowledgeable installer about
proper hardware.
IMPORTANT:
Your speakers have been packed as a DIRECT / DIFFUSE mirror imaged
matched set. Make sure that each speaker is mounted on the appropriate side to yield the
desired surround effect (see “Direct vs. Diffuse Sound Pattern”. The arrows on the back of
each speaker indicate the DIRECT or DIFFUSE radiation pattern.
INCLUDED HARDWARE
(2) mounting
brackets
(4) toggle wing screws
(8) rear
felt pads
(8) rubber feet for
shelf mounting
