5
2"
(51mm)
2
1
⁄
2
"
(63mm)
MOUNTING
1. Mark off the two bracket mounting
holes using the VR-M/EX Mounting
Template provided. If running wires
behind the wall, then also mark off a
1
⁄
2
"
(12mm) hole located at 2
1
⁄
2
" (63mm)
below the lower bracket hole. This hole
is also positioned on the template.
Drill
1
⁄
2
" (12mm) holes
toggle wings
6-32 x 2"
machine screws
2. Drill all holes as indicated. Insert the
machine screws through the bracket and
thread them onto the toggle wings before
penetrating the wall. Push the toggle
wings through the holes in the wall.