Boston Acoustics SPG555, Руководство пользователя

Страница: 11 / 16

Installing The RVC
™
1) Install the new gasket (provided) on to the RVC ™
u
.
2) Align the notches on the RVC ™ with the insets on the
SPG555 cone
v
(the RVC ™ is keyed for proper orientation
and will not seat flush or seal into the cone if the RVC ™ is not
properly positioned).
3) Once the RVC ™ is seated to the cone, hand tighten the six
screws
w
, do not over-tighten the screws.
v u w
Installing The Handle
1) The handle is held in place by two screws (included in
the hardware kit). The handle can be positioned on one
of eight different ways
u
.
2) Line up the handle with two of the six screw holes on the
RVC ™ . Using the provided 2.5mm tool, hand tighten the
screws
v
. The specific orientation of the handle will not
effect performance, however, to ensure proper
tuning, must be installed prior to using the SPG555.
Warning: Choose the position of the handle wisely. Installing the
screws into the RVC
™ will mar the area around where the screw is
installed. Although not visible with the handle installed in the original
position, if the handle is moved, you will be able to see the enlarged
screw holes from the previous install position.
0º
45º
90º
-45º
v u
10