T
u
n
in
g
T
h
e
A
m
p
lif
ie
r
-
F
ro
n
t
A
n
d
R
e
a
r
S
p
e
a
k
e
rs
7
Tuning The Amplifier - Front And Rear Speakers
WARNING!
A distorted signal from the head unit sent to the amplifier can cause
loudspeaker failure at higher listening levels.
6) Input Sensitivity Control (Gain)
Slowly rotate the control clockwise (refer to the diagram on page 3) until
maximum undistorted playing level is heard from the speakers. Listen closely for
bottoming from the speakers. If detected, rotate the input sensitivity control
counterclockwise until it is eliminated.
7) Crossover Controls
To achieve higher undistorted playing levels from the front or rear speakers, the
Highpass crossover must be engaged. Rotate the crossover control fully clockwise
(refer to the diagram on page 3). The highpass crossover point is now set at
200Hz. Q-Tune should be set to off.
Slowly rotate the input sensitivity control clockwise until maximum undistorted
playing level is heard from the speakers. Listen closely for bottoming from the
speakers. If detected, rotate the input sensitivity control counterclockwise until it is
eliminated. Slowly rotate the highpass crossover control counterclockwise while
listening for bottoming. You are lowering the crossover point, which means that
more bass signal is being sent to the speakers. If bottoming is detected, rotate the
input sensitivity control counterclockwise until it is eliminated and/or rotate the
Highpass crossover control clockwise to raise the crossover point.
Connection Diagram:
akers - 80Hz Highpass
s 35Hz Highpass, and Q of 1.2
Содержание GTA 1105
Страница 1: ...High Performance 5 Channel Amplifier GTA...
Страница 11: ...Notes 11...