Vertical mounting,
right speaker– ar-
rows pointing right
Vertical mounting,
left speaker–
arrows pointing
left
Horizontal
mounting– arrows
pointing up
Holding the BASEPLATE in position as a template, mark the centers of
the two elongated mounting holes with a pencil. Drill
5
/
8
" (15mm) holes in
the wall for the supplied toggle bolts.
• Mount the BASEPLATE on the wall:
Orient the BASEPLATE over the holes you
drilled. Make sure the BASEPLATE is level.
Tighten MOUNTING SCREWS firmly, mak-
ing sure TOGGLE BOLTS are properly
seated.
• Drill the wall holes:
Fit a SQUARE NUT into the square well on
the back of the BASEPLATE. (Use a finger to
hold the SQUARE NUT in position until the
baseplate is on the wall.)
• Fit the MOUNTING SCREWS onto the BASEPLATE:
Loosely assemble two long machine screws and two toggle
bolts through the elongated mounting holes in either end of
the baseplate.
