Boston Acoustics CRB Скачать руководство пользователя страница 2

Страница: 2 / 4

Horizontally, with adjustable tilt downward

Vertically, with adjustable pivot side-to-side

• Identify the appropriate holes on the back of the speaker for the BRACKET:

• Determine the mounting orientation.

INSTALLATION

• Install the speaker RETAINER WASHERS:
Install two of the #10 x

" SELF-THREADING SCREWS and

matching RETAINER WASHERS into the pair of holes you
identified above. Tighten firmly.
CAUTION: USE ONLY THE CORRECT #10 SCREWS
SUPPLIED.

Boston

For horizontal mounting, use these holes

For vertical mounting, use these holes

Содержание CRB

Страница 1: ...low plaster wall Alternatively you may wish to obtain wood screws for wood or wall studs molly bolts or screw anchors for drywall or plaster or masonry anchors for masonry 2 1 4 SQUARE NUTS 2 BRACKETS...

Страница 2: ...ne the mounting orientation INSTALLATION Install the speaker RETAINER WASHERS Install two of the 10 x 3 4 SELF THREADING SCREWS and matching RETAINER WASHERS into the pair of holes you identified abov...

Страница 3: ...the BASEPLATE on the wall Orient the BASEPLATE over the holes you drilled Make sure the BASEPLATE is level Tighten MOUNTING SCREWS firmly mak ing sure TOGGLE BOLTS are properly seated Drill the wall...

Страница 4: ...ion BRACKET on baseplate so that BRACKET s plain end without the flange and T slots is toward the direction of arrows on BASEPLATE Assemble CLAMP over BRACKET so that ribbed open side of CLAMP faces u...