16-ENG
Magazine Removal
Remove the battery before removing the magazine.
1. Remove all fasteners from the magazine
2. Rotate the magazine release lever down to free the magazine (
POSITION 2
).
3. Pull the magazine back to remove from the tool (
POSITION 3
).
POSITION 2
POSITION 1
POSITION 3
Jammed Staple Removal
Remove the battery from the tool
before removing jammed staples.
1. Remove the magazine from the tool.
2. Carefully remove the jammed fastener from
the tool.
3. Reinstall the magazine.
Leg Length Adjustment
Remove the battery before adjusting the leg length.
1. Loosen the Leg Length Lock Screw on the bottom of the tool.
2. Turn the Leg Length Dial (3) with a flat blade screw driver until the arrow is pointed at
the correct setting for the staple being driven.
3. Tighten the Leg Length Lock Screw.
LEG
LENGTH
LOCK
SCREW
3
