Bostitch BTFP02040, Руководство по эксплуатации и обслуживанию

Страница: 10 / 16

10
MAINTENANCE
Service and Maintenance:
Prior to performing service and maintenance to the compressor, always disconnect all
accessories and attachments from the unit, and disconnect the compressor from the electrical
source. When replacing parts, only use Genuine BOSTITCH replacement parts.
1. REPLACING THE AIR FILTER
If you notice a reduction in performance of the air compressor, and the air delivery is lower than
desired, it may be necessary to replace the air filter. A clogged air filter reduces performance
and can cause increased wear.
• Unplug the air compressor. Allow the unit to cool for five minutes if needed.
• To remove the old air filter, remove the two phillips head screws from the black plastic
air filter cover.
• Using a clean, dry cloth, wipe away any loose dirt or debris before reinstalling the new filter.
• Insert the new air filter and reassemble the filter cover being careful not to over tighten
the screws.
2. CHANGING THE OIL
Replace the oil after the first 100 hours of operation and every 300 hours following the first
oil change.
• Place a suitable container underneath the drain to collect used oil.
• Remove the drain plug with a 7/16 in. hex key.
• When the used oil has drained, reinstall the drain plug and tighten with the wrench.
• Remove the dipstick.
• To refill, use a funnel to pour oil into the fill hole. Refill only with ISO100/SAE 40 Non-
Detergent Oil or Equivalent
.
NOTE : Avoid refilling with too much oil. Ensure that the level of the oil does not exceed the
maximum reference level on the dipstick. The recommended amount of oil for refilling is 240 ml (8 oz.).
• Reinsert the dipstick securely into the oil fill hole.
ANY OTHER SERVICE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED
BOSTITCH SERVICE CENTER
The Stanley Works Pty Ltd Consolidated Warranty Terms
This warranty is provided by The Stanley Works Pty Ltd (Stanley Australia)
Warranty related enquiries and claims may be directed to:
Stanley Black & Decker Pty Ltd
82 Taryn Drive, Epping, Victoria 3076
Australia Hotline: 1 800-338-002
New Zealand Hotline: 09 269 6714
enquiries@stanleyworks.comau