background image

18

WARRANTY 

BOSSWELD undertakes to repair or replace, at its option, any new 

BOSSWELD product which fails due to a defect in materials or workmanship 

during the 12 month warranty period. Any repair work must be carried out by 

an authorised BOSSWELD repair agent.

This warranty does not apply to, or in any way cover:

1. 

Normal everyday wear and tear.

2. 

Failure due to improper use.

3. 

Failure of, or caused by, parts or components which are not original    

  BOSSWELD parts.

4. 

Failure arising from accident, abuse, fire, vandalism, contaminated fluids 

  or neglect or failure to store or use the BOSSWELD product in  

  accordance with the instructions provided in this manual.

Note:

The following items are not included in the 12 month warranty period:

Welding tips, welding goggles and flint lighter

DISCLAIMER

Whilst the above information is provided in good faith, BOSSWELD does 

not warrant the accuracy of the information provided or assume any legal 

responsibility for it or for any damage which may result from reliance on 

or use of it or from any negligence of BOSSWELD or other person(s) with 

respect to it.

Содержание BRAZEN 3000





















Отзывы: