BossWeld 660250, Руководство пользователя

Страница: 15 / 48

15
9
10
11
16
12
13
14
15
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
WIRE INCH BUTTON
Press and hold to feed wire
GAS CHECK BUTTON
Press and hold to check gas flow
WELDING PROCESS BUTTON
- MIG-MAG Pulse Synergic
- MIG-MAG Dual Pulse Synergic
- MIG-MAG Manual
- MIG-MAG Synergic
- MMA
- TIG
TRIGGER MODE SELECT BUTTON
- 2T
1. Press the trigger and Hold, The set pre-gas flow starts and the arc starts
and will upslope to the amperage selected on the amperage dial.
2. When you want to finish the weld, release the trigger and the amperage will begin to
downslope at the rate you have selected on the downslope dial, If you selected zero
the arc will stop as soon as you release the trigger.
- 4T
1. Press the trigger and Hold,The set preflow gas starts and the arc starts.
2. Release the trigger and the amperage will upslope to the amperage selected on the amperage dial.
3. When you want to finish the weld, press and hold the trigger and the amperage will begin to
downslope at the rate you have selected on the downslope dial, amperage will remain at this level
until you release the trigger.
4. Once you have released the trigger the arc will stop and the postflow gas will continue for a pre set
amount of time
- S4T
1. Press the trigger and Hold,The set preflow gas starts and the arc starts.
- SPOT WELD
1. Hold the torch in a vertical position above the job
2. Press and release the trigger
3 Hold the torch in position and wait until post gas flow end
L PARAMETER SELECT / ADJUSTMENT KNOB
Use this knob to select functions and adjust parameters
R PARAMETER SELECT / ADJUSTMENT KNOB
Use this knob to select functions and adjust parameters
JOB BUTTON
In the JOB mode, 100 different JOB records can be stored and called, Improve the quality of
welding process.
PROGRAM SAVE / DELETE
Save current setting you need to press Job button first and then select a job number that is not
being used this will be indicated by - - - on the left digital display, job number is displayed on
the right digital display,or delete programed job number
SPOOL
GUN