22
MACHINE SET UP TIG WELD
8.Select TIG LIFT OR HF Start mode
2. Connect TIG Torch
to the terminal
5. Connect earth Clamp
to the terminal
2. Connect the Gas hose to the
Gas Output and the
TIG Torch Control Socket and
screw the nut up firmly.
4. Connect the Argon Gas Regulator
supplied to the Gas bottle and connect the
Gas Hose to the Gas Input socket on the
rear of machine and the Regulator. Ensure
the Gas regulator is in the off position.
Set up the TIG torch. Place the Tungsten
Electrode into the torch head and ensure back
cap and collet body are screwed in firmly.
3
Plug the machine 15Amp input power plug
into the wall socket, ensuring that the power
switch on the machine is in the OFF position.
1
Connect the Argon Gas Regulator supplied to
the Gas bottle and connect the Gas Hose to
the Gas Input socket on the rear of machine
and the Regulator. Ensure the Gas regulator
is in the off position.
4
Install the TIG Torch to the machine
by connecting the Dinse Connector to the
Negative Output Connection Socket , the Gas
hose to the Gas Output and the TIG Torch
Control Socket and screw the nut up firmly.
2
