O P E R A T O R’ S M A N U A L F O R L S S E R I E S
BOSS
LASER -
Page
|
ϰ
dƌŽƵďůĞƐŚŽŽƚŝŶŐ
Laser not coming on
First make sure power receptacle the laser is plugged into has working power. Plug in some other
device, like a lamp or power drill and check for power.
Check the simple stuff first.
•
Is the emergency kill button pressed?
•
Is the key turned to the on position?
Machine coming on but not firing
The laser has several protection modes built in to prevent possible injury or machine damage.
Problems with any of these systems will prevent the laser from actually firing, although the head
will still move around like the machine is working fine.
•
Check the water supply. If the laser does not detect water flowing through the tube the laser
will not fire, so make sure either your CW-3000/5000 water
chiller is on.
•
Make sure all doors are closed. All our machines come with interlocks to prevent operation in
the advent lid or doors are open
yŽƌz^ůŽƉKǀĞƌƌƌŽƌͬ&ƌĂŵĞKǀĞƌƌƌŽƌ
When running the
&ƌĂŵĞ
and/or
START
Ͳ
PAUSE
button, the
^ůŽƉͬ&ƌĂŵĞ
error message will appear
only if the object(s)/image(s) being executed on the worktable is overextending (too big and/
or not enough space on the worktable to be done)
The file/job keeps starting at the same spot every time
In most cases, this happens when the
“
KZ/'/E
”
was accidentally selected. To cancel the origin,
ƉƌĞƐƐ
ƚŚĞ
ͬh
ďƵƚƚŽŶĂŶĚĐLJĐůĞƚŚƌŽƵŐŚƚŚĞŽƉƚŝŽŶƐƵŶƚŝůLJŽƵƐĞĞ
džŝƐZĞƐĞƚн
͘^ĞůĞĐƚŝƚĂŶĚƚŚĞŶŚŝŐŚůŝŐŚƚ
ŽǀĞƌƚŚĞ
yzĂdžŝƐƌĞƐĞƚ
͘KŶĐĞƚŚĂƚŝƐƐĞůĞĐƚĞĚ͕ƚŚĞůĂƐĞƌŚĞĂĚǁŝůůŐŽƚŽŝƚΖƐŚŽŵĞƉŽƐŝƚŝŽŶĂŶĚŶŽǁƚŚĞ
ŽƌŝŐŝŶŚĂƐďĞĞŶĐĂŶĐĞůůĞĚ͘dŽĐŚĂŶŐĞƚŚĞŽƌŝŐŝŶƉŽƐŝƚŝŽŶ͕ũƵƐƚ ŵŽǀĞƚŚĞůĂƐĞƌŚĞĂĚƚŽLJŽƵƌĚĞƐŝƌĞĚ
ůŽĐĂƚŝŽŶ͕ƚŚĞŶƉƌĞƐƐƚŚĞ
KZ/'/E
ďƵƚƚŽŶĂŐĂŝŶƚŽƐĞƚƚŚĞŽƌŝŐŝŶ͘
