Bosslan BOSST62, Руководство пользователя, Страница: 18 / 32

DTMF sending mode configuration three kinds
the above are basic configurations of SIP.
Configure automatic detection server of the phone;
Configure main and backup auto-swap server; if the phone
enables main and backup server function the automatic detection and auto-swap
functions should both be chosen;
SOME ISP INTERNET MAY INHIBIT THE PHONE TO REGISTER AND CANCEL THE
REGISTER IN SUCCESSION, SO USER HAD BETTER NOT APPLY OR REGISTER AND
CANCEL SOON IN SUCCESSION AND SUBMIT REGISTRATION REPEATEDLY. SERVER
MAY STOP RESPONSE OF DIALOGUE MACHINE, THEN THE PHONE RECEIVES NO
CERTIFICATION OF REGISTER/CANCEL LOGIN REQUEST AND REGISTRATION STATE
WILL SHOW AS INCORRECT!
； ：
，
，
Note:
If you want to register and call through server you must configure corresponding numbers
(which are usually SIP accounts)to local port otherwise the phone will reject for sending out
register message when it considers that there is no number.
，
After the aforesaid network and VoIP configurations have been configured on the phone
and internetwork communication has been implemented the user can make VoIP calls
by the calling register and proxy.
Caller ID
When you receive a call, the caller's phone number is shown on the screen, if the caller's
information is transmitted from the network on which the call was
made. The last 10 received calls are stored in the Caller ID memory, and you can use the
list to make a call to any of the numbers.
The Call ID icon appears when there are new calls in the memory. Once you view all
the new calls using the Call Log menu, the icon will disappear.
To review and dial any of the received numbers:
1. Press the button.
, then press the button. 2. Press the r button to choose
3. Scroll the Caller ID numbers by using the or button and choose the desired
number.
4. To dial the selected number, press the button.
1. Scroll to the number you want to delete from the Caller ID memory, then press the
button.
2. Press the button to confirm the deletion.
1. Press the button.
2. Press the or button to choose , then press the button.
3. Enter the PIN, then press the button.
4. Press the button.
o
Result: The LCD window shows the last caller's number (up to 20 digits). The time when the call was
received is also displayed. If there is no caller ID received, is displayed.
To delete a specific number from the Call Log:
To delete all numbers in the Caller ID memory:
Result:
Result:
The LCD window prompts you to enter the PIN. The PIN is preset to "0000" at the factory.
The phone prompts you to confirm the deletion.
MENU
MENU
13 42