Page 13
Control Panel Layout and Buttons Configurations:
Controls:
•
Adjusting the timer function:
•
While the blower (motor) is not running, press and hold
•
Decrease Value
button over 3 seconds to
enter timer mode. Adjust to desired period of delay off timer by pressing
Increase Value
or
Decrease
Value
button (minimum 1 minute to maximum 15 minutes). This setting will be saved immediately.
Activating the timer function:
•
While the blower (motor) is running, press and hold
•
Power
button for over 3 seconds to activate
delay off timer. Power-off delay indicator will lit up and power-off delay digital timer will begin to
countdown, when it reaches zero, the blower (motor) will shut down.
Adjusting the light:
•
Press
•
Light
button once to turn on the lights, and once again to turn off the lights.
While the lights are off, press and hold
•
Light
button for over 3 seconds to dim the lights from low to
high. Level of brightness will be stored in system’s memory.
CAUTION: DO NOT touch the lights until switched OFF and cooled.
Note: Light settings are independent from other settings (including power-off delay) and lights has to be
manually turned on or off.
Note: The system saves user configurations, settings such as light, timer and blower (motor) speed will re
-
main the same the next time it is turned on.
Range Hood Operations
(Continued)
Power
Decrease Value
Light
Increase Value
Blower Power Indicator
Blower Speed Indicator
Power-On Elapsed Digital Timer
Power-Off Delay Digital Timer
Power-Off Delay Timer Indicator
Light Power Indicator
