@bosscoautoofficial
@bosscoautoofficial
Assembly
1-
Parts List
：
NO.
NAME
QTY
SPEC
NO.
NAME
QTY
SPEC
1
FRONT/REAR
BAR
2
Front and rear
are the same
7
END HEAD COVER
4
All end head covers
are the same
2
SIDE BARS
2
Both bars are
identical
8
M6*15 ALLEN KEY
HEAD BOLT
16
M6*15mm
3
MIDDLE BAR
4
All 4 middle
bars are
identical
9
M6*25 ALLEN KEY
HEAD BOLT
14
M6*25mm
4
CROSS BAR
2
Both cross bars
are identical
10
ALLEN KEY HEAD
BOLTS
24
M5*10mm
5
PLASTIC SPACER
10
ALL plastic
spacers are
identical
11
SPRING WASHERS
30
D6
6
END CAP
4
All end caps are
identical
12
FLAT WASHERS
30
D6
Aluminium Roof Platform Assembly Instructions
1.
Prepare all parts for installation. It is recommended to start assembling with the product
upside-down.
2.
Using the provided M5*10 allen key head bolts, connect the front/rear bars (1) with the side
bars (2) using the provided end caps. Make sure the slotted holes on the bars are facing
upward.
3.
Carefully place and align all 4 middle bars (3) on the slotted holes and hand tighten with the
provided M6*15 allen key head bolts (8). Repeat for all 4 middle bars.
4.
Place each cross bar (4) on the inner two slotted holes as seen in figure… and hand tighten
with M6 15mm allen key head bolts (8). Make sure that the channel is facing upwards (the
channel will be facing downwards once installed on the roof).
5.
Flip over the roof platform.
6.
Bolt on the plastic spacers between the 4 middle bars using the provided M6*25 allen key
head bolts. Make sure that the lip of the middle bars sits in the slots of the plastic spacers.
Содержание 20810
Страница 4: ... Figure 2 ...
