17
Operation
3.
If you want to add distortion, turn the DRIVE knob to the right.
The distortion increases the more the knob is turned to the right.
You can select and store one of the eight different “distortion” types, such as
“METAL ZONE,” “FUZZ,” “BOOSTER,” etc. (p. 26)
The volume level can also be stored by placing the DRIVE knob at the appropriate
position at the time of a write operation. (p. 18)
4.
Press the MANUAL/MEMORY button to switch the “MANUAL” and “MEMORY (1–3)”
settings.
When set to “MANUAL,” sounds are output exactly as set by the panel controls.
When set to “MEMORY,” the MEMORY indicator lights up, and sounds are output accord-
ing to the settings saved to Memories 1–3.
Bring the pedal back and press the heel switch to switch between “MEMORY (1–
3)” and “MANUAL.”
When the heel switch is held down for two seconds or longer, the ON/OFF
indicator flashes, and the pedal switches to the bypass mode.
In the bypass
mode, guitar sounds input at the INPUT jack are output as is from the OUTPUT
jack (operating the pedal or adjusting the knobs switches the pedal out of bypass).
Содержание V-Wah PW-10
Страница 42: ...42 Setting Memo ...
Страница 44: ...G6017356 ...
