Boss SB18BRGB, Руководство пользователя

Страница: 8 / 15

Bluetooth
Before you can stream music from your mobile device (iOS device or Android device) to the sound bar through
Bluetooth, pair the sound bar with your mobile device.
1.
The sound bar automatically switches to Bluetooth mode when turned on. “bt” appears and flashes to
indicate that the sound bar enters pairing mode.
If Bluetooth mode is not activated, press MODE briefly to select Bluetooth mode.
2.
On your mobile device, enable Bluetooth function and select the device name (“Boss Audio SB18BRGB”) to
pair the sound bar with the mobile device. If prompted for password, enter “0000”.
If no Bluetooth device is paired within ten minutes, the sound bar will automatically exit pairing mode. In this
case, you need to repeat the steps above to re-enter the pairing mode.
Note: Only one device can be paired at a time.
3.
When successfully paired/connected, “bt” on the display stops flashing and lights up. Play audio on your
mobile device, and audio will be streamed to the sound bar.
After pairing, the sound bar will be automatically connected to your mobile device each time the two are
turned on. To connect a second mobile device, disconnect the current Bluetooth connection by holding down
for two seconds then repeat the steps above for pairing.
12
Playback control
• To pause or resume play, press .
• To select the previous or next track, press
or .
• To adjust volume, press VOL +/- .
To maximize audio performance, set the volume of the connected device to a minimum of 75%.
Ideally, on the highest volume setting you can get without distortion.
To avoid battery exhaustion, make sure to run the vehicle engine when operating the sound bar.
Operational range can be reduced by any obstacle between the sound bar and the device.
If the connected device is out of the effective range from the sound bar, the device will be automatically
disconnected. The device will be automatically re-connected if it is back to the effective range.
7