Boss RT3 Undercarriage, Инструкция по установке

Страница: 2 / 4

g249173
Figure 2
1. Nut (3/8 inch) 3. Full spacer
2. Washer 4. Carriage bolt (3/8 inch)
7. Use 4 hex-head bolts (3/8 inch) and 4 nuts (3/8
inch) to loosely secure the front of the skid plate
and the support mounts to the bumper (
Figure
3 ).
g249172
Figure 3
1. Nut (3/8 inch) 3. Support mount
2. Hex-head bolt (3/8 inch)
8. Use 6 hex-head bolts (3/8 inch), 6 nuts (3/8
inch), 4 hex-head bolts (1/2 inch), and 4 nuts
(1/2 inch) to loosely secure the pushbeam
assembly to the skid plate (
Figure 4 ).
g249174
Figure 4
1. Hex-head bolt (1/2 inch) 3. Hex-head bolt (3/8 inch)
2. Nut (1/2 inch) 4. Nut (3/8 inch)
9. Torque all the fasteners to the following
specifications:
•
3/8-inch bolts: 31 N∙m (23 ft-lb)
•
1/2-inch bolts: 76 N∙m (56 ft-lb)
•
M10 bolts: 66 N∙m (49 ft-lb)
2