Boss RC-600, Руководство по параметрам, Страница: 36 / 48

36
Input FX/Track FX List
The
mark indicates parameters that can be controlled using the external expression pedal, when the functions of EXP1 or EXP2 (p. 25) in
CTL/EXP of CTL FUNC are configured to control the input FX/track FX intensity.
About step sequences
This function changes the effects according to the settings of each step (maximum of 16 steps). You can also change effects in sync with loop
performance.
5
Effects that can use the step sequence function are indicated by the mark.
5
The step sequence parameters are shown below. Set the parameters for each effect.
Parameter Value
(Bold: default)
Explanation
SW OFF , ON Sets the step sequence function on/off.
SYNC OFF , ON
Sets whether to synchronize loop playback with the step sequence (ON) or not (OFF).
When this is “ON,” the beginning of the step sequence (step 1) is cued up.
RETRIG
OFF
, ON
If this is turned “ON,” the beginning of the phrase playing back in a loop is synchronized with the beginning
of the step sequence (step 1) when you use an onboard switch or external footswitch to which effect on/off is
assigned, to turn the effect on that’s set in the step sequence.
TARGET
Sets the parameter that the step sequence changes.
* The value (parameter) changes depending on the effect. Parameters that can be set as a TARGET are marked with a 2 ( 2 ; blue stars indicate
initial values).
STEP RATE
0–100, 4MEAS, 2MEAS, 1MEAS,
ˇ
–
¸
–
`
Sets the step’s cycle.
STEP MAX 1– 16 Sets the maximum number of steps.
STEP VAL1–16 1–16 Sets how much the effect for each step changes.
Types available for both Input FX and Track FX
LPF
Low pass filter. This reduces the volume of all frequencies above the cutoff frequency.
Parameter Value
(Bold: default)
Explanation
RATE
4MEAS, 2MEAS,
1MEAS,
ˇ
–
¸
–
`
, 0–100
Sets the rate of modulation.
DEPTH
2
0–
50
–100 Sets the depth of modulation.
RESONANCE 0– 50 –100 Sets the intensity of the effect.
CUTOFF
2
0–
50
–100
Sets the cutoff frequency of the
filter.
BPF
Band pass filter. This leaves only the frequencies in the region of the cutoff frequency,
and cuts the rest.
Parameter Value
(Bold: default)
Explanation
RATE
4MEAS, 2MEAS,
1MEAS,
ˇ
–
¸
–
`
, 0–100
Sets the rate of modulation.
DEPTH
2
0–
50
–100 Sets the depth of modulation.
RESONANCE 0– 50 –100 Sets the intensity of the effect.
CUTOFF
2
0–
50
–100
Sets the cutoff frequency of the
filter.
HPF
High pass filter. This cuts the frequencies in the region below the cutoff frequency.
Parameter Value
(Bold: default)
Explanation
RATE
4MEAS, 2MEAS,
1MEAS,
ˇ
–
¸
–
`
, 0–100
Sets the rate of modulation.
DEPTH
2
0–
50
–100 Sets the depth of modulation.
RESONANCE 0– 50 –100 Sets the intensity of the effect.
CUTOFF
2
0–
50
–100
Sets the cutoff frequency of the
filter.
PHASER
Gives the sound a swishing quality by adding a phase-shifted sound.
Parameter Value
(Bold: default)
Explanation
RATE
4MEAS, 2MEAS,
1MEAS,
ˇ
–
¸
–
`
, 0–100
Sets the speed of the effect.
DEPTH 2 0– 50 –100 Sets the richness of the effect.
RESONANCE
2
0–
50
–100 Sets the intensity of the effect.
MANUAL
2
0– 50 –100
Sets the center frequency of the
phaser effect.
D.LEVEL 2 0– 100
Sets the volume of the direct
sound.
E.LEVEL
2
0–
50
–100
Sets the volume level of the effect
sound.