Boss RC-600, Руководство по параметрам, Страница: 12 / 48

12
System Settings (MENU)
9
INPUT/RHYTHM
Parameter Value
(Bold: default)
Explanation
MAIN (*4)
MIC 1, 2
OFF, ON
Sets whether to output the input and rhythm sounds from MIC 1, 2/INST 1, 2 to MAIN (ON) or
not (OFF).
Use the [1]–[4] knobs to move the cursor, and press the [1]–[4] knobs to switch between ON/
OFF.
INST 1 L, R
INST 2 L, R
RHYTHM
SUB1 (*4)
MIC 1, 2
OFF,
ON
Sets whether to output the input and rhythm sounds from MIC 1, 2/INST 1, 2 to SUB 1 (ON) or
not (OFF).
Use the [1]–[4] knobs to move the cursor, and press the [1]–[4] knobs to switch between ON/
OFF.
INST 1 L, R
INST 2 L, R
RHYTHM
SUB2 (*4)
MIC 1, 2
OFF, ON
Sets whether to output the input and rhythm sounds from MIC 1, 2/INST 1, 2 to SUB 2 (ON) or
not (OFF).
Use the [1]–[4] knobs to move the cursor, and press the [1]–[4] knobs to switch between ON/
OFF.
INST 1 L, R
INST 2 L, R
RHYTHM
PHONES (*4)
* This is shown when the SW parameter of ROUTING/PHONES OUT is set to “INDIVIDUAL.”
MIC 1, 2
OFF, ON
Sets whether to output the input and rhythm sounds from MIC 1, 2/INST 1, 2 to PHONES (ON)
or not (OFF).
Use the [1]–[4] knobs to move the cursor, and press the [1]–[4] knobs to switch between ON/
OFF.
INST 1 L, R
INST 2 L, R
RHYTHM
PHONES RHYTHM
* This is shown when the SW parameter of ROUTING/PHONES OUT is set to a value aside from “INDIVIDUAL.”
OFF , ON
Sets whether to output the input and rhythm sounds from MIC 1, 2/INST 1, 2 to PHONES (ON)
or not (OFF).
RHYTHM OUT
This sets the output destination of the rhythm sound.
OUTPUT Outputs from the output jack that’s set to “ON” in RHYTHM.
LOOP
Lets you record rhythm sounds in a loop, or perform loops while using the note messages
from an external MIDI device to trigger the rhythm.
(*4) When STEREO LINK (p. 9) is “ON,” the MIC 1, 2 and L/R channels are shown as a single connector.
9
PHONES OUT
Parameter Value
(Bold: default)
Explanation
SW
These parameters specify the track to output from the PHONES jack.
* When STEREO LINK (p. 11) is “ON,” MAIN, SUB 1 and SUB 2 are shown.
MAIN
-L, R The track set in “MAIN-L, R” (p. 11) of ROUTING/TRACK is output.
SUB1-L, R The track set in “SUB1-L, R” of ROUTING/TRACK is output.
SUB2-L, R The track set in “SUB2-L, R” of ROUTING/TRACK is output.
INDIVIDUAL The track set in “PHONES” of ROUTING/TRACK is output.