Boss MD500 Скачать руководство пользователя страница 19

Страница: 19 / 30

Parameter List

Parameter

Value

Explanation

ACT LOW

0–126

Within the operating range of the source, this specifies the range that will

control the target parameter.
The target parameter will be controlled within the range specified. Normally, you

should leave ACT LOW at “0” and ACT HIGH at “127.”

ACT HIGH

0–127

WAVE RATE (*1)

0–100, –

Specifies the time for one cycle of the wave pedal.

* If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a

period either 1/2 or 1/4 of that time.

WAVE FORM (*1)

SAW, TRI, SIN

Select one of the following to specify the change produced by the wave pedal.

SAW

TRI

SIN

TRIGGER
(INT PEDAL TRIGGER)
(*2)

Specifies how the motion of the internal pedal will be triggered.
PAT CNG
(PATCH CHANGE)

This is activated when a patch is selected.

EXP LOW

This is activated when an external expression pedal connected to the CTL 1,2/
EXP jack is set to the minimum position.

EXP MID

This is activated when the external expression pedal connected to the CTL 1,2/
EXP jack is moved through the middle position.

EXP HIGH

This is activated when the external expression pedal connected to the CTL 1,2/
EXP jack is set to the maximum position.

CTL1, 2 PDL

This is activated when an external footswitch connected to the CTL 1,2/EXP jack
is operated.

CC#1–#31
CC#64–#95

This is activated when a control change is received.

TIME
(INT PEDAL TIME)
(*2)

0–100

This specifies the time over which the internal pedal will move from the toe-
raised position to the toe-down position.

CURVE
(INT PEDAL CURVE)
(*2)

LINEAR,
SLOW (SLOW RISE),
FAST (FAST RISE)

Select one of the following curves to specify the change produced by the

internal pedal.

LINEAR

SLOW

FAST

*1: SRC=WAVE PDL only
*2: SRC=INT PDL only

Содержание MD500































Результаты поиска

Содержание MD500

Отзывы:

Бренды по названию

Популярные бренды

Boss MD500, Руководство пользователя

Результаты поиска

Содержание MD500

Отзывы:

Бренды по названию

Популярные бренды