manualshive.com logo in svg

Boss MD500, Руководство пользователя

Поделиться
Скачать
Boss MD500 Скачать руководство пользователя страница 11

11

Parameter List

Parameter

Value

Explanation

CE-1 CHORUS, CE-1 VIBRATO

RATE

0.01–20.00 Hz

Adjusts the rate of the chorus.

BPM

6.0–600.0

Specifies the tempo.
The range of this setting depends on the RATE or NOTE value.

NOTE

`

–

Œ

Adjusts the rate of the chorus, specified as a note value relative to BPM.

DEPTH

0–100

Adjusts the depth of the chorus.

LOW LEVEL

-50–+50

Adjusts the low frequency range tone.

LOW FREQ

20.0–800 Hz

Specifies the frequency adjusted by the LOW LEVEL setting.

HIGH LEVEL

-50–+50

Adjusts the high frequency range tone.

HIGH FREQ

630–16.0 kHz

Specifies the frequency adjusted by the HIGH LEVEL setting.

PREAMP SW

OFF, ON

Specifies whether the CE-1’s preamp is simulated (ON) or not simulated (OFF).

PREAMP GAIN

1–100

Adjusts the gain of the preamp. Higher settings will produce distortion.

PREAMP LEVEL

0–100

Adjusts the volume of the preamp.

OUTPUT MODE

Specifies the output of the chorus.
MONO

Mono output.

STEREO

Direct sound is output from the OUTPUT A/MONO jack, and effect sound is 

output from the B jack.

TRI-CHO

RATE (*1)

0.01–20.00 Hz

Adjusts the rate of the chorus.

BPM (*1)

6.0–600.0

Specifies the tempo.
The range of this setting depends on the RATE or NOTE value.

NOTE (*1)

`

–

Œ

Adjusts the rate of the chorus, specified as a note value relative to BPM.

LFO MODE

Selects the LFO mode.
PRESET

The RATE is fixed (4.98 Hz).

MANUAL

RATE adjusts the rate of the chorus.

P+M

The PRESET and MANUAL LFOs are summed.

INTENSITY1 (*2)

0–100

Adjust the depth of the three-phase chorus.

INTENSITY2 (*2)

0–100

INTENSITY3 (*2)

0–100

BRIGHT

OFF, ON

Specifies whether the high-frequency region of the effect sound is boosted (ON) 

or not boosted (OFF).

LOW LEVEL

-50–+50

Adjusts the low frequency range tone.

LOW FREQ

20.0–800 Hz

Specifies the frequency adjusted by the LOW LEVEL setting.

HIGH LEVEL

-50–+50

Adjusts the high frequency range tone.

HIGH FREQ

630–16.0 kHz

Specifies the frequency adjusted by the HIGH LEVEL setting.

OUTPUT MODE

MONO, STEREO

Specifies whether the output is mono (MONO) or stereo (STEREO).

*1: Unavailable if LFO MODE is “PRESET”
*2: Shown if LFO MODE is “MANUAL” or “P+M”

Содержание MD500































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды