http://bossbeds.ca
STEP 4: Connect power supply
Plug the power cord into the power supply as shown.
STEP 3: Overturn the bed base carefully
Carefully turn the base over using two people. Do not lay the
base on its side to prevent damage to the side button, fabric
or legs.
Put the bed base in a desired place with the bottom of the
box facing up. Remove box cover, take out all of the packing
materials and put aside, Make sure not to puncture the bed
with any sharp objects.
Installation
STEP 2: Remove the bed from the box
STEP 1: Remove packing materials
Remove the bed base from the box keeping the bottom of
the base facing upwards. Install the 4 legs to the four corners
as shown. Tighten the legs by hand. Ensure the legs are
secured tightly.
P.S. Install the headboard brackets at the same time if
attaching to a headboard. See the page 16.
