Boss Snowplow VBX 6500, Руководство пользователя

Страница: 24 / 32

Cleaning
Cleaning the Machine
Service Interval: Before each use or daily
Empty the cleanout tray after every use.
Important:
Leaving any material in the spreader
could damage the machine.
1. Remove the spinner assembly; refer to
Removing the Spinner Assembly (page 18) .
2. Disconnect the power/ground cable and main
harness from the wire harness.
3. Lift up on the cleanout tray handle to clear the
mount holes and slide the tray out (
Figure 39 ).
Note:
This step will require at least 2 people.
g029518
Figure 39
1. Cleanout tray
4. Remove any material from the tray.
5. Insert the tray into the spreader.
6. Connect the power/ground cable and main
harness to the wire harness.
Storage
1. Unload the spreader; refer to Unloading the
Spreader (page 18) .
2. Remove the spreader from the truck using the
lift bars (
Product Overview (page 13) ).
3. Wash and rinse the entire unit.
4. Clean and grease all of the bearings.
5. Clean and grease the pintle-chain for models
VBS14210B, VBS15310B, and VBS15160B.
6. Clean all exposed connectors and apply
dielectric grease to them.
7. Remove the controller from the truck and store
it in a clean, dry place.
24