Boss Snowplow MSC23345, Руководство пользователя

Страница: 8 / 12

g322158
Figure 11
1. Bolt (5/8 inch) 3. Nut (5/8 inch)
2. Push frame
3. Torque all 4 bolts to 153 N∙m (113 ft-lb).
Note:
Do not overtighten the fasteners; ensure
that the push frame can pivot freely.
4. Hook the 2 trip springs through the holes on the
push frame (
Figure 12 ).
g316202
Figure 12
1. Washer (1/2 inch) 3. Eyebolt
2. Nylon locknut (1/2 inch) 4. Trip spring
5. Hook the other ends of the trip springs to 2
eyebolts (
Figure 12 ).
6. Insert the threaded end of the eyebolts through
the holes on the plow blade and secure them
using 2 washers (1/2 inch) and nylon locknuts
(
Figure 12 ).
7. Tighten the nylon locknuts until there is a gap of
0.8 mm (1/32 inch) between the trip spring coils.
Installing the Hydraulic
Hoses
Install the hoses to the manifold as shown in Figure
13 .
g317030
Figure 13
8