Boss Snowplow MSC23345, Руководство пользователя

Страница: 6 / 12

2. Remove the hose connection from the fitting in
port C1 (
Figure 6 ).
g316862
Figure 6
1. Fitting 2. Hose connection
3. Remove the fitting from the manifold.
4. Use a pick to remove the orifice disc from the
manifold.
Note:
Do not discard the orifice disc. It is
required for installing other Groundsmaster
attachments.
5. Install the fitting onto the C1 port on the manifold.
6. Secure the hose to the fitting.
7. Torque the fitting to 47 to 53 N∙m (35 to 39 ft-lb).
8. Torque the hose connection to 41 to 45 N∙m (30
to 33 ft-lb).
Adjusting the Weight Transfer of
the Attachment
Refer to the machine Operator’s Manual .
Installing the Required Kits
Install the following kits:
•
Auxiliary Hydraulic Kit (31966)
•
Accessory Control Kit (31994)
Installing the Plow on the
Machine
1. Install the clevis pins through the lift arm
bushings.
g317027
Figure 7
2. Install the cotter pins.
6