10. TUNER OPERATION
7)
BAND BUTTON (BAND/SEARCH)
Manual Tuning
Auto Seek Tuning
Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio
frequency number up or down one step.
Press the Up Tuning or Down Tuning button for less than 3 seconds to move to next station
automatically.
Recall a Station
Select a band (if needed). Press a preset button to select the corresponding stored station.
20-21) TUNING UP/DOWN BUTTON (
)
12-17) PRESET STATIONS BUTTONS
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button for 3 seconds. The
preset number will appear in the display.
Automatically Store
Preset Scan
Automatically select 6 strong stations and store them in the current band. Select a band (if
needed). Press AS/PS button for more than three seconds. The new stations replace
stations already stored in that band.
Scan stations stored in the current band. Select a band (if needed). Press AS/PS button for
less than 3 seconds. The unit will pause for ten seconds at each preset station. Press AS/PS
button again to stop scanning when the desired station is reached.
The unit will automatically pick up a stereo signal, when available. When in stereo mode,
the ST icon
appears in the display. When no stereo signal is available, the unit will
automatically revert to mono operation, and no icon will be displayed.
STEREO
11)
AUTOMATICALLY STORE / PRESET SCAN (AS/PS)
Press BAND to change between FM bands.
12
