If it appears that your DVD unit is faulty, please first consult this checklist. It may be that
something simple has been overlooked.
Under no circumstances should you try to repair the player yourself, as this will void the
warranty. Only qualified service personnel may remove the cover or service this player.
No Power
No Picture
Distorted Picture
Completely Distorted Picture
No Color in Picture
Disc Does Not Play
No Sound
The Player Does Not Respond to the Remote Control
Picture is distorted or Only Black and White
No Audio at Digital Output
Buttons Do Not Work
If the power supply is connected to the car accessory circuits, but the engine is not
turned on, switch the ignition key to “ACC.”
Check if the fuse is blown. Replace with a new fuse if necessary.
Check if the POWER button on the front of the player is set to ON.
Check if the monitor or TV is switched ON.
Check if select proper mode has been selected (such as Disc Play mode or AV mode).
Check the video connections.
Check the disc for fingerprints and clean it with soft cloth, wiping from center to the
edge.
Sometimes a small amount of picture distortion may be present. This is not a
malfunction.
The disc format is not the same as the TV-set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu.
The disc format is not the same as the TV-set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu.
Be sure that the disc label faces up.
Clean the disc.
Check if the disc is defective by trying another disc.
Check the audio connections.
Aim the remote control directly at the sensor on the front of the player.
Remove any obstacles which may interfere with the signal path.
Inspect or replace the remote control battery.
The disc format is not according to the TV-set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu.
Check the digital connections.
Check the Digital Audio menu to make sure that the digital output is correctly set.
Check if the audio format of the selected audio language matches your receiver’s
capabilities.
Press Reset button on the front panel of the DVD unit.
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
Troubleshooting
User’s Manual page 29
-
