Remove the screws which attach the sun
visor to the ceiling of your vehicle. Place
the visor on clean towel or cloth in a clean
area of your worksurface.
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
The installation instructions describe the process of installing the monitor into the
sun visor, but they do not describe how to route the wires through your vehicle to
the visor location. For best results, consult with a professional installer on this issue.
Push on the visor with your fingers to make
sure there are no obstructions inside that
would interfere with the installation. After
you confirm that there are no internal
obstructions, take the paper template provide
in place, and mark the area to be cut.
After you confirm that there are no internal
obstructions, make a paper template in a
rectangular shape, exactly 6-5/8" x 4-3/4"
and tape it in the place where you want to
locate the monitor.
Since the monitor frame is wider than the
monitor housing, be sure to leave at least 1-
3/4" space on the visor surface to the right
and left of where the opening will be.
Trace the template accurately with a pencil
onto the surface of the visor and remove the
template.
Carefully peel back the upholstery material.
Set the adjustable blade to 1/2" depth, and
cut around the edges of the hole. Pull up
one corner of the visor padding, and use the
blade to cut underneath – remove a small
section at a time, using the "pull up and cut"
method for uniform depth.
Using sharp scissors, cut the points off the
flaps of upholstery material to 3/8" wide.
Route the cable from the place where it
attaches to the ceiling through the visor to
the cavity you have created for the monitor.
The neatest way to do this is to feed the
cable through the metal tube which runs
along the top of the visor interior and ends
hidden in the roof liner of the vehicle.
Then fold the four flaps into the cavity in the
headrest.
Using a sharp, adjustable-depth blade knife,
make a diagonal cut from one corner (of the
rectangular area you traced from the
template) to the opposite corner. Repeat,
cutting diagonally between the other two
corners.
Thread the cable through the hole in the
lower left corner of the monitor shroud (if
the monitor is in the shroud, first see the
section called "Removing the Monitor" and
follow the instructions for removal).
Insert the monitor shroud into the cavity in
the visor to test the fit and make any adjust-
ments necessary. When you are satisfied,
use hot glue to attach the monitor shroud
to the visor. Be sure to hold the monitor
firmly in place, applying gentle pressure,
until you are sure the hot glue has hardened.
Connect the AV/power cable from the
monitor to the cable you have already
installed in the visor.
Then place the monitor into the shroud and
gently press until you hear a "click."
VIDEO INPUT 1
RED
BLACK
FUSE
to Chassis Ground
VIDEO INPUT 2
VIDEO SOURCE 2
(DVD player, video
game, etc.)
(YELLOW)
(YELLOW)
VIDEO OUT
VIDEO OUT
AUDIO OUT
L
R
LEFT AUDIO INPUT
(WHITE)
RIGHT AUDIO INPUT
(RED)
VIDEO SOURCE 1
(DVD player, video
game, etc.)
Troubleshooting
BV6VIS User’s Manual - page 11
Specifications
BV6VIS User’s Manual - page 12
Monitor Controls and Features
BV6VIS User’s Manual - page 5
BV6VIS User’s Manual - page 4
Features
What is included?
BV^VI User’s Manual - page 3
BV6VIS User’s Manual - page 2
General precautions
Safety precautions
BV6VIS User’s Manual - page 8
Remote Control
BV6VIS User’s Manual - page 6
BV6VIS User’s Manual - page 7
CONTENTS
BV6VIS User’s Manual - Contents
U S E R ’ S M A N U A L
BV6VIS User’s Manual - page 9
BV6VIS User’s Manual - page 10
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous page. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
When first unpacking your new flip-
down monitor, please check first that
the package contains all of the items
below. If something is missing, contact
the store where you purchased the
player.
• LCD monitor
• Monitor shround
• Wireless remote control with
batteries
• RCA/mini-headphone auxiliary
AV input Y cable
• Power/AV cable
• Monitor removal key
• Mounting screws
• Do not operate this equipment while
driving – safe driving should always
be your highest priority.
• Do not mount this monitor on the
sun visor in front of the driver.
In some states and countries, the
viewing of images on a screeen inside
a vehicle is illegal, even by people other
than the driver. Be sure that the
installation and operation of this system
is in compliance with local rules and
regulations.
• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
are present which may result in electric
shock. Refer any repairs to a qualified
service technician.
• Do not attempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.
• To avoid risk of electronic shock or
damage to the monitor, do not permit
any of this equipment to become damp
or wet from water or drinks. If this does
occur, immediately unplug the power
cord and send the monitor to your
local dealer or service center as soon
as possible.
• if there is smoke or any peculiar odor
present during useor if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible .
2
General precautions
2
Safety precautions
3
Installation precautions
3
Operating precautions
4
Features
4
What is included?
5
Monitor controls and features
6
Remote control
7
System wiring
8
Monitor installation
10
Removing the monitor
10
Remote control battery
replacement
11
Troubleshooting
12
Specifications
Congratulations on your purchase
of a
Video Monitor.
It has been designed, engineered
and manufactured to bring you the
highest level of performance and
quality, and will afford you years of
viewing pleasure.
Thank you for making
your
choice for car video entertainment!
A/V SYSTEM
Screen size
Screen format
Video Compatability
LCD panel type
Resolution, pixels
Brightness
A/V Inputs
GENERAL
Power requirements
Power consumption
Dimensions (L x W x H)
All specifications subject to change without notice.
MODEL
page
BV6VIS
6" Visor-Mount TFT Monitor
SYMPTOM
CAUSE
REMEDY
Insert the removal key into the gap
on the right side of the monitor to
depress the tabs to release it.
