3
INSTALLATION (CONT.)
INSTALLATION
DIAGRAM
- Only use speakers with 4 ohm impedance.
- The maximum current of the Amp Remote trigger is 200mA.
Wiring Connections
WIRING DIAGRAM
!
Removal of the Main Unit
1. Remove the metal strap from the main unit.
2. Remove the plastic trim out from the main unit.
3. Insert a bracket key into the left and right side of the main unit and draw the unit out of
the mounting sleeve.
HEX BOLT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
HEX NUT
DASH BOARD
METAL MOUNTING STRAP
CONSOLE
MOUNTING SLEEVE
ACC + (Red)
GND - (Black)
ANT + (Blue)
Power B+ (Yellow)
Green
Purple
Rear Right
Speaker
Front Right
Speaker
Rear Left
Speaker
Front Left
Speaker
Purple/Black
Green/Black
White
White/Black
Gray
Gray/Black
15
1. Yellow: Video Output Socket 1
2. White: AUX-Left CH Input
3. Red: AUX-Right CH Input
4. Yellow: Video Output Socket 2
5. White: Front Left PRE-AMP Output
6. Red: Front Right PRE-AMP Output
7. Green: Subwoofer Output Socket
8. White: Rear Left PRE-AMP Output
9. Red: Rear Right PRE-AMP Output
CAUTION
+12V DC
NEGATIVE
GROUND
15A
Radio Antenna
