GENERAL OPERATION
• ON/OFF
Switch on the unit by pressing
PWR
button (1). When system is on, press it again
to turn it off.
• FACEPLATE RELEASE
Press
REL
button (2) to draw out the faceplate, push the panel to draw in.
When the faceplate is drawn out, turn the faceplate upward and adjust TV display.
• SELECTING SOUND MODE
Press
SEL
button (6) to move display through volume, bass, treble, balance and
fader functions. Use (7) and (8) buttons to adjust the selected mode.
When mode has not been adjusted for several seconds, display returns to previous
display status (e.g. radio display or CDC display).
Volume
Adjust volume level using (7) and (8) buttons.
Bass
Press
SEL
button (6) for one time. Adjust bass level using (7) and (8) buttons.
Treble
Press
SEL
button (6) for two times. Adjust treble level using (7) and (8) buttons.
Balance
Press
SEL
button (6) for three times. Adjust sound balance between left and right
speakers using (7) and (8) buttons.
Fader
Press
SEL
button (6) for four times. Adjust sound balance between front and rear
speakers using (7) and (8) buttons.
• SELECTING PLAYING MODE
When the screen display is drawn in, press
MOD
button (12) to select desired
playing mode between radio and CDC. When the screen display is drawn out, the
unit would automatically switch into TV mode. By pressing
MOD
button (12), you
can select desired playing mode among TV, radio and CDC.
CAUTION:
The installation must be done in a way that prevents TV operation while
driving. During this time you may choose between radio and CD (Changer) modes.
• MUTE
Press
MUT
button (3) to cut down sound output,
“MUTE”
appears on display.
Press it again to resume the previous volume level.
• SETTING THE CLOCK
Press
DSP
button (5) to change the display into clock display. While the current
time is appeared on the display, press it again to return to frequency showing.
Time Setting
- Set hours:
Holding down
DSP
button (5) for several seconds, and the clock is blinking on
the display, press button (14) to adjust the hour.
9
VOL
BAS
TRE
BAL
FAD
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
