Boss Audio Systems 820UA, Руководство пользователя

Страница: 6 / 18

E - 4
4. DETACHABLE CONTROL PANEL(D.C.P)
1. To attach the front panel back to the unit
chassis, firstly join the left guide block
hole to the left cylinder (
), then
join the right guide block hole and the
right cylinder ( ).
To remove the front panel:
1. Press the Panel Open Button.
2. After flipping down the front panel, push it rightwards ( ), then draw the left of the
front panel outwards ( ).
CAUTION
Socket
Removing The Detachable Front Panel
Attaching The Detachable Front Panel
The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall.
To prevent damage to the D.C.P, always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful
not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the D.C.P is dirty, wipe off the dirt with soft,
dry cloth only. And use a cotton swab soaked
in isopropyl alcohol to clean the socket on
the back of the D.C.P.
Open
button
1.
2.
2. Press the centre of the front panel until a “
click” sound is heard.
Step 1
Step 2
Step 1
Step 2
U
P
S
H
Step 2 Step 1
Step 1
Step 2