Page 4
Page 11
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL S UPPORT S TRAP
To boost up the capability of anti-jamming,
please make sure fix tightly the
support
strap into the metal joint that connect to the
chassis of the car.
metal
To properly fix the meal mounting
sleeve, bend the tabs of the sleeve
against the DASHBOARD with
a screwdriver.
METAL MOUNTING SLEEVE
DASHBOARD
FRONT PANEL
PLASTIC TRIM RING
UNIT CHASSIS
NOTE
To attach the removable faceplate back to
the unit chassis, firstly join the left guide
block hole to the left cylinder, then join the
right guide block hole and the right
cylinder, finally flip the front panel up to
combine with chassis.
Before mou n tin g an d ope rating
th e CD player, r emo v e th e metal
mo unting sle eve illu s tra t ed b y the
ar rows.
Remove the two screws that
fix the CD deck mechanism
player during transportation
before mounting the player.
RESET BUTTON
Push this reset button with a cuspidal
object to renovate the distorted program
once the program is distorted.
To rem ove the fro nt pan el,
after flippin g do w n the front
pan el, push it righ tward s
firstly, then d raw the le ft of
the fr ont pa nel ou tward s.
EJ ECT (EJ) BUTTON
To remove the unit out of the metal mounting sleeve,
insert the two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the chassis
out of the metal mounting sleeve as shown in the right
illustration.
Before inserting or ejecting disc, press
the REL button to flip down the faceplate.
B) To select and adjust the menu mode:
Press SEL button long to turn on MENU mode, and the LCD will display BEEP
2ND/BEEP ALL/BEEP OFF, then press SEL button shortly and repeatedly to
select SEEK1/SEEK2(in RADIO mode), DSP OFF/FLAT/POP M/CLASSICS/
ROCK, SUBW ON/OFF, VOL LAST/ VOL ADJ and ESP 6 / ESP 25 in the
sequence and circulation. After selecting a desired mode, rotate the VOL knob
on the front panel or press the + or - button to select one setup item of the
desired mode.
C) BEEP 2ND/BEEP ALL/BEEP OFF:
BEEP 2ND mode: the beep is only generated when an allotted double key is
pressed long(1second).
BEEP ALL mode: the beep is generated when every key is pressed(except power
and release buttons).
BEEP OFF mode: the beep is disabled.
D) SEEK1/SEEK2:
SEEK1: press >>| or |<< button hold to seek up or down for the strong signal
station. And then stop seek when received the strong signal station.
SEEK2: press >>| or |<< button hold to seek up or down for the strong signal
station. And do not stop seek when received the strong signal station. After
release it and then received the strong signal station, the seek will stop.
E) DSP OFF/FLAT/POP M/CLASSICS/ROCK
To select a preset EQ mode or turn off it.
F) VOL LAST/ VOL ADJ
VOL LAST: During playback, turn off the power and then turn on the power again,
at the time, the volume level will be the one before turn off the power.
VOL ADJ: When it is in VOL ADJ mode, the next mode will be A-VOL after
VOL ADJ mode, then you can adjust the defaulted volume level. The
minimum value of the defaulted volume level you can set is 10.
G) ESP 6/ESP 25
To select the time of the electronic shock protection for disc playback.
When the LCD displays wrongly or some function knobs are disable, press the
REL button to flip down the front panel and then take it away from the unit chassis.
Push the RESET button with one needle analog to reset the distorted program to zero.
Press the REL button to flip down the front panel and then take it away from
the head unit. And the anti-theft LED indicator will flash all the time till the
front panel is assembled back to the head unit.
8. To reset the unit
9. To take away the front panel
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
Содержание 740UA
Страница 1: ......
