-
Top of ladder and roof top tent locating pins are non-load bearing
-
Do not stand on the top 3 steps/rungs
-
Do not exceed 75°
-
Ensure ladder is on an even, level and unmovable base
-
Do not exceed maximum total load
-
Always check that all buttons are on the “locked” position before you climb the ladder
-
Always extend from the bottom rung
Precautions
Opening the Ladder
With automatic locking, each rung of the ladder has 2 locking pins that are blocked, which are
automatically inserted into the slots of the uprights when the ladder is extended.
The condition of the lock is indicated by the two black buttons on the side of each rung, as
shown below.
Complete Extension of the Ladder
1. Place the ladder onto firm and level ground, then place one foot on the lowest rung.
2. Lift the top rung up and ensure that the buttons are locked (as shown above) Repeat this
process with each of the lower rungs in turn, until the arms are completely extended.
Partial extension of the ladder
1. Place the ladder onto firm and level ground, then place one foot on the lowest rung.
2. Lift the top rung up and ensure that the buttons are locked (as shown above). Repeat
this process with each of the lower rungs until the desired ladder and rung height has been
achieved.
Shortening the Ladder
-
Place the ladder on firm and level ground.
-
Unlock the two buttons on the highest rung you can safely reach to lower the rung
down to the closed position. Continue doing this until the top rungs are all closed.
-
Work your way down via each lower level, unlocking the buttons and then lowering
therungs until the ladder is all packed away.
