20
Do not clean the appliance when operating.
Do not clean the appliance with pressurized water.
TROUBLESHOOTING
Fault
Possible cause
Actions to be taken
The appliance is not
operating
The plug may not be
connected
Connect the plug to power
supply
The plug may be connected
but the emergency stop button
may be activated
Turn the emergency stop button
in direction of arrow labelled on
the button
Time duration may be finished
Adjust time clock for required
duration
The time duration may be
adjusted but the start button
may not be activated
Press Start button to start the
appliance
The appliance makes
abnormal sounds
You may set the appliance on
uneven surface
Set the appliance on level
ground or provide stability via
adjustable braces
You may exceed the capacity
which strains the engine
Compare appliances capacity
and the amount of potatoes,
remove the excess amount
Lack of power supply
The plug may be connected
improperly
Check the plug and correct if
necessary
The contactor makes sound
Restart the appliance
Plug cable may be torn and/or
there may be lack of phase
Open the cable and check if
there is any fault if necessary
Table 5 – Failure cause
MAINTENANCE
Clean the housing with damp cloth after every operation or daily.
No less than once a month remove lower emery and clean dust, dirt and possible
accumulations that may be below.
Make sure you set the bottom plate properly on shaft. Turn it in the right
and the left direction if necessary to set it properly.
