34
4.7 Integrated
Peripherals
This section provides more peripheral devices setting including
IDE/SATA storage devices, COM ports, USB controller, audio function,
and special power on control.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
X
OnChip IDE Device
[Press Enter]
Item Help
X
Onboard Device
[Press Enter]
X
SuperIO Device
[Press Enter]
Onboard Lan Boot ROM
[Disable]
Watch Dog Timer Select
[Disabled]
Onboard Serial Port 3
[280]
Serial Port 3 Use IRQ
[IRQ10]
Onboard Serial Port 4
[288]
Serial Port 4 Use IRQ
[IRQ10]
X
USB Device Setting
[Press Enter]
↑↓←
→
: Select Item
+/-/PU/PD: Value
F10: Save
Esc: Quit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. HS-7280 supports one IDE controllers – a primary and a
secondary – so you can install up to two separate hard disks. HS-7280
also provides two SATA ports.