background image

 

C

C

C

o

o

o

p

p

p

y

y

y

r

r

r

i

i

i

g

g

g

h

h

h

t

t

t

 

 

 

D

D

D

i

i

i

s

s

s

c

c

c

l

l

l

a

a

a

i

i

i

m

m

m

e

e

e

r

r

r

s

s

s

 

 

 

The accuracy of contents in this manual has passed thorough checking and review before 
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for 
any infringements of patents or other rights resulting from its use. The

 manufacturer will 

not be responsible for any direct, indirect, special, incidental or consequential 

damages arising from the use of this product or documentation, even if advised of 

the possibility of such damage(s). 
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all 

documentation rights. Unauthorized reproduction, transmission, translation, and 

storage of any form and means (i.e., 

electronic, mechanical, photocopying, recording) 

of this document, in whole or partly, is prohibited, unless granted permission by BOSER 
Technology Co., Ltd.

 

BOSER Technology Co., Ltd.

 reserves the right to change or improve the contents of 

this document without due notice. 

BOSER Technology Co., Ltd.

 assumes no 

responsibility for any errors or omissions that may appear in this manual, nor does 

it make any commitment to update the information contained herein. 

T

T

T

r

r

r

a

a

a

d

d

d

e

e

e

m

m

m

a

a

a

r

r

r

k

k

k

s

s

s

 

 

 

BOSER is a registered trademark of BOSER Technology Co., Ltd. 
ISB is a registered trademark of BOSER Technology Co., Ltd. 
Intel is a registered trademark of Intel Corporation. 
Award is a registered trademark of Award Software, Inc. 
All other trademarks, products and or product names mentioned herein are 

mentioned for identification purposes only, and may be trademarks and/or 

registered trademarks of their respective companies or owners. 

 

©  Copyright 2004 BOSER Technology Co., Ltd. 

All Rights Reserved.  

Edition 3.4 May 25, 2004 

Содержание HS-6237































































Отзывы: