49
4.7 Integrated
Peripherals
The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary
and a secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the
BIOS issue a series of commands to affect the transfer to or from
the disk drive, PIO allows the BIOS to tell the controller what it
wants and then let the controller and the CPU perform the
complete task by them. This is much simpler and more efficient
(also faster).
CMOS Setup Utility
-
Copyright ©1984-2001 Award Software
Integrated Peripherals
On chip IDE Channel 0
Auto
Item Help
On chip IDE Channel 1
Auto
Menu Level
X
IDE Prefetch Mode
Enabled
IDE Primary Master PIO
Auto
IDE Primary Slave PIO
Auto
Change the day, month,
IDE Second Master PIO
Auto
year and century
IDE Second Slave PIO
Auto
IDE Primary Master UDMA
Auto
IDE Primary Slave UDMA
Auto
IDE Second Master UDMA
Auto
IDE Second Slave UDMA
Auto
Init Display First
PCI Slot
IDE HDD Block Mode
Enabled
Onboard FDC Controller
Enabled
Onboard Serial Port1
3F8/IRQ4
Onboard Serial Port2
2F8/IRQ3
UART Mode Select
Normal
UART2 Duplex Mode
Half
RXD, TXD Active
Hi, Lo
IR Transmission delay
Enabled
Onboard Parallel Port
378/IRQ7
Parallel Port Mode
SPP
ECP Mode Use DMA
3
EPP Mode Select
EPP1.7
Onboard Legacy Audio
Enabled
Sound blaster
Enabled
S/B I/O Base Address
220H
S/B IRQ Select
IRQ5
S/B DMA Select
DMA1
MPU-401
Disabled
MPU-401 I/O Address
330H-333H
: Select Item + / - /PU/PD: Value F10: Save ESC: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Содержание HS-6050
