English - 9
Physical Setup
3.
On the rear panel of the monitor, firmly pull out on the
bottom of the connector cover (
A
), and pull down (
B
) to
remove it.
Connector cover
B
A
4.
Insert the screws into the holes on the back of the monitor
and tighten using the provided 5/32 in. (4 mm) hex wrench.
5.
Place the monitor on a flat, stable surface capable of
supporting the combined weight of the stand and the
monitor—46 in. (135 lbs/61 kg), 55 in. (150 lbs/68 kg).
Monitor
6.
Attach the monitor cable and AC power cord to the monitor
as shown.
Monitor
cable
AC power
cord
