English - 7
Control and Connection Panels
Figure 4. T8S Connection Panel
Connection Panel
q
POWER SWITCH
– Turns the mixer on or off.
w
USB 2.0 TYPE-B
– A USB interface that allows you to connect the mixer to your computer.
e
USB 2.0 TYPE-A
– A USB interface that allows you to stream audio from your flash drive.
r
ANALOG L/R OUTPUT
– Main analog output. Accepts 1/4" TRS balanced and TS unbalanced cables.
t
AUX OUTPUT
– Four user-definable analog outputs. Can be configured for a pre-fader, post-EQ, and
effects, or post-fader output. Accepts 1/4" TRS balanced or TS unbalanced cables.
y
AUX IN
– Analog input channels 9/10. Accepts 1/4" TRS balanced or TS unbalanced cables for line-level
inputs. Can be used for stereo input signals.
u
INPUTS 1-8
– Analog input channels 1-8. Accepts XLR balanced cables for microphones or 1/4" TRS balanced
or TS unbalanced cables for high-impedance inputs, such as guitars.
i
XLR STEREO OUTPUT
– Stereo analog output. Accepts XLR balanced cables for stereo output.
o
DIGITAL POWER PORT
– For use w/ ToneMatch power supply (see “Connecting the ToneMatch® Power
Supply” on page 12).
Note:
The T8S is NOT designed to connect digitally to the L1® Model 1S/II.
CAUTION:
Although the ToneMatch port accepts a standard RJ-45 connector, do NOT connect the T8S
to a computer or phone network.
M
(
)
MAIN OUT
USB AUDIO
MONO
q
w
e
r
t
y
u
i
o
