9
Y
OUR
SL2
WIRELESS
SURROUND
LINK
English
Deutsch
Français
Dansk
Español
Italiano
Svenska
Nederlands
Knowing what the Status LEDs indicate
On the rear of the SL2 transmitter and receiver, the color of the Status LED indicates how
each unit is functioning. The indicators include:
• Blinking green: when the power pack is plugged in
• Solid green: when the receiver and transmitter are in communication
• Solid orange: when there is no signal to communicate
• Blinking red: when there is a problem
For information on how to deal with a blinking red LED, see Troubleshooting below.
Troubleshooting
Contacting Customer Service
For additional help in solving problems, contact Bose Customer Service. Refer to the address
sheet included in the carton.
Problem
What to do
Blinking red Status
LED on either the
SL2 transmitter or
receiver
• Reposition the unit to remove any obstruction to the ventilation. Check to see if the
LED changes color.
• Unplug the power pack for the unit and contact Bose Customer Service. Refer to the
address list included in the SL2 carton.
No sound
• Make sure the audio source is playing.
• Check to be sure both the SL2 transmitter and receiver power packs are properly
plugged into functioning AC power outlets. Refer to “Making the connections” on
page 5.
• Make sure that cables are properly connected to the SL2 transmitter, the Acoustimass
module, the SL2 receiver and your surround speakers. The connectors must be
inserted securely in the jacks.
• Make sure the SL2 transmitter and receiver are no more than 30 feet (9.2 meters) apart.
• Locate the pin labeled Reset on the bottom of both the SL2 transmitter and the SL2
receiver. Using a fine-pointed tool (like a straightened paper clip), press one pin then,
within 10 seconds, press the other.
• Move the receiver, the transmitter, or both so the transmission path between them
does not intersect with large metal objects in your room or other obstructions (like a
fish tank full of water).
When the problem is resolved, the Status LED lights a solid green.
Other
Need input from
team reviewers
•