5
Installation
Using a junction box
Install a double-gang electrical box for
each user interface.
The Bose
®
ControlSpace™ CC-4 Room
Controller is designed to fit a North Ameri-
can, Japanese, Australian, and some
European double-gang junction boxes.
• Mount a North American or
Japanese box vertically, as
shown.
• Mount a European or
Australian box horizontally,
as shown.
• Choose a location that is convenient for
the person using the controls.
• Install the junction box recessed slightly
or flush to the surface of the finished
wall.
CAUTION:
Do not install a ControlSpace
CC-4 Room Controller in a junction box that
houses an AC power (mains) cord.
CAUTION:
Install only in accordance with
the National Electrical Code. Consult your
local AHJ for further information.
Mounting
After connecting the wires, mount the user
interface in the junction box.
Two sets of screws are provided. Use the
screws that are appropriate for your junc-
tion box: Use #6 for North American
boxes, or M4 for Japanese, European, and
Australian boxes.
CAUTION:
Do not overtighten the screws.
Overtightening may cause the frame to
break.
Room
Control
frame
Cover
After securing the user interface frame to
the junction box, snap the cover onto the
frame.
To remove the cover, insert the flat head of
a screwdriver into the slot on either side of
the cover.
AM306693_01_Install Guide.fm Page 5 Monday, June 4, 2007 4:43 PM
