Using Auditioner
®
Playback System III
11
Svens
k
a
N
e
d
e
rl
a
n
d
s
It
alian
o
Fran
çais
E
spaño
l
Deuts
c
h
D
an
sk
EnglishDansk
Deutsch
Italiano
Nede
rla
nds
Svens
k
a
F
ra
nçais
E
sp
añol
English
Auditioner
®
Playback System III User Guide
Connecting one Auditioner
®
Playback System III to another (daisy chaining)
Figure 7
You can daisy chain up to
12 Auditioner
®
Playback
System IIIs.
You can daisy chain up to 12 Auditioner playback system units. All Auditioner playback
systems will play the same audio as the “parent” system, and each Sound Pressure Level
meter will show the same level for all connected playback systems. The USB activity light will
only be illuminated on the "parent" system. The “parent” system receives the digital signal
from the computer. Each additional “child” system is daisy-chained to the “parent” by an
analog connection.
Note:
During presentations, we recommend that you place the parent system so that the pre-
senter can see the USB activity light on the back of the Auditioner playback system. This will
allow the presenter to easily verify that sound data is being input into the daisy-chained sys-
tems.
Figure 8
Daisy chain connections
Follow these steps to daisy chain Auditioner playback system units:
1.
Connect the Auditioner playback system’s USB cable from the USB port of your com-
puter (or USB hub) to the USB input on the Auditioner playback system. Connect the A
end (the larger end) to the laptop (or USB hub) and the B end (the smaller end) to the
Auditioner playback system. This will be the "parent" System.
2.
Connect the parent playback system's RCA “OUT" to the second (child) playback sys-
tems RCA "IN"
3.
Connect the second (child) playback system's RCA “CHAIN" to the third (child) playback
system's RCA "IN".
4.
Connect the third playback system’s RCA “CHAIN” to the fourth system’s RCA “IN”.
5.
Repeat step 4 until all Playback systems are connected.
6.
Power on each system by flipping the power switch located on the back panel of each
Auditioner playback system.
Using Auditioner
®
Playback System III
8
Eng
lis
h
D
eu
ts
ch
Fr
anç
a
is
Da
ns
k
E
spa
ñ
ol
It
alian
o
Sven
sk
a
Ne
de
rla
nds
Da
nsk
Ita
lia
no
Sve
n
ska
De
ut
sc
h
N
ed
erlan
d
s
English
F
rançais
Espa
ño
l
Auditioner
®
Playback System III User Guide
Using Auditioner Playback System III
Powering the unit on
The On/Off switch is located on the back of the Auditioner playback system. Press the
switch into the On position to turn the unit on. If the unit does not power on, make sure it is
plugged in.
Note:
The Auditioner playback system has been designed to work only with the Bose
®
Modeler
®
Plus software. Although it is possible to connect Auditioner playback system as a
standard USB audio device, or as an analog audio device, any signal that Auditioner playback
system receives would not be equalized for the playback system. As a result, the audio signal
will be spectrally and spatially incorrect.
Adjusting the chin rest
Figure 5
Use both hands to adjust
the Auditioner
®
Playback
System III chin rest
.
Follow these steps to adjust the chin rest:
1.
Place one hand on the chin rest.
2.
Press the chin rest adjuster with your other hand. Take care not to pinch your hand or
fingers as you adjust the position.
3.
Gently push the chin rest up or down until it is in a comfortable position
Note:
When you store the Auditioner playback system, make sure the chin rest is pushed
down as low as it can go so that it will fit into the carrying case.
Содержание Auditioner Playback System III
Страница 1: ......
